Water does not wait for business hours, and neither do we. Call any time and we will get a team moving.
We look at the damage, explain what it needs and give you a written price before we start.
We photograph the damage, log moisture readings and send the paperwork your adjuster asks for, so you have less to chase.
You do not have to work out how bad it is on your own. Call, tell us what you see, and a Miami technician will explain the next step and what it should cost.
Think of drywall as a wick. When water reaches the bottom of a wall, the gypsum and paper draw it upward, often a foot or more above the level the water ever reached on the floor. The painted face can look and feel normal while the back side and the insulation behind it are soaked. Looks cannot be trusted here, so every wall gets tested with a meter.
A wet wall does not automatically mean demolition. Firm panels wetted by clean water are frequently saved, in some cases with the baseboard taken off and small openings drilled so air can move inside the wall. If the drywall has gone soft, crumbles, shows mold or took in dirty water, we do a flood cut, meaning a level cut over the damaged area with all material beneath it removed.
Water at the base of the wall soaks into the drywall edge and starts to climb. Both the baseboard and the bottom plate start absorbing water.
You may see blistered paint and swollen trim as the damp area moves up the wall. Mold can start on the paper facing inside the cavity.
Paper peels from a core that is no longer firm. Insulation slumps inside the wall, odor builds and mold spreads across the hidden back side.
Studs and plates stay wet long enough to grow mold and begin to decay. The amount of removal and reconstruction grows considerably.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Call (510) 447-5586| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Outlets and switches | Receptacles the water never reached, confirmed by an electrical check | Every device that was submerged or took on water |
| Paint and wallpaper | Paint that stays bonded on a wall that dried flat | Peeling paint and vinyl paper holding dampness against the wall |
| Plaster walls | Hard plaster that keeps its bond after drying | Spots gone chalky or soft, or pulling off the lath |
| Baseboards and trim | Real wood pieces that stay straight and uncracked after drying | MDF trim that has swollen or flaked at the edges |
| Drywall | Wet briefly by clean water and remains firm and flat | Soft, swollen, moldy, or wet from gray or black water |
Batts of fiberglass absorb water and keep it pressed to the framing. No amount of airflow on the painted side will dry a cavity packed with wet batts.
Water passes under the bottom plate into the next room or closet. Every wall involved is tested on its two faces, and so is the adjacent flooring.
Sections of wall covered by cabinets, a vanity or shelving stay damp because air never reaches them. We take readings through toe kicks and from the opposite side to find it.
On an exterior wall, water can soak the sheathing behind the insulation. Because it is slow to dry, we test it before any new drywall goes up.
Every wall is checked with a thermal camera and moisture meter, and we mark the height and reach of the water, covering the other face and the rooms next door.
You get a straight answer on what can be dried where it is and what must be removed, judged by the category of water, the time it sat and the firmness of the drywall.
For walls being saved, baseboards come off and air is directed into the cavity. Walls that cannot be kept get a flood cut along a level line, with the wet insulation pulled.
Drying typically takes 3 to 5 days of air movement and dehumidification before the framing and surviving drywall meter dry. After that comes insulation, new drywall hung and finished, trim put back and paint.
Have a different question? Call us and we will answer it over the phone.
Call (510) 447-5586Take action now and prevent costly damage. Miami Restoration Co is ready to help.
Call (510) 447-5586 Now