You get a straight answer on cost up front, with every line explained and nothing hidden.
Water does not wait for business hours, and neither do we. Call any time and we will get a team moving.
You focus on your home. We put together the photos, readings and reports your insurance company needs.
Most people who call us have never dealt with attic water damage before. We walk you through it on the phone, then send a local crew with the right equipment.
Water reaches an attic from two directions. Worn out shingles, flashing that has failed, and the seals around chimneys and vents all let rain in from overhead. The house itself sends moisture upward too, and in a poorly ventilated attic it condenses on cold sheathing. Either way, hardly anyone goes up there to look. Our team in Miami inspects the attic, finds the source, and dries it out.
Wet insulation is the heart of most attic jobs. Heating and cooling bills go up because cellulose and fiberglass alike give up R-value when wet. Worse, soaked insulation holds water against the ceiling drywall and the framing for weeks. Saturated material comes out, air movers and dehumidifiers dry the wood, and any mold on the sheathing or rafters gets treated.
We check the roof deck, flashing points, vents and exhaust ducts to learn whether the water is a leak, condensation, or both. Thermal imaging and moisture meters show how far it reached.
We bag and remove insulation that is moldy or saturated, which lets the drywall and wood beneath it dry. The access path is kept contained and the living area underneath is protected.
With dehumidifiers and air movers, the sheathing, joists and rafters return to normal moisture levels. Visible mold is cleaned from the wood and an antimicrobial is applied.
The roof or ventilation issue behind it is pointed out to you, and we are glad to pass what we found to your roofer. Once the attic stays dry, new insulation goes in to restore the R-value.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Call (510) 447-5586| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Rafters and joists | Surface staining or light mold on wood that is still sound | Visible cracks, or rot soft enough for a screwdriver to sink in |
| Roof sheathing | Solid despite staining, with moisture readings back to normal after drying | Soft, sagging between rafters, or its layers are separating |
| Cellulose insulation | Still loose, with dampness limited to the surface | In most cases, because it has packed down or soaked through |
| Recessed lights and wiring | An electrician finds them dry, clean and free of corrosion | Water got inside the housing or connections show rust |
| Fiberglass insulation | Quick drying of a small area that took clean rainwater | Any mold, dirt or matting, or wetness lasting past a few days |
The insulation catches and absorbs whatever rain gets by the roofing. With no sign inside the house, nobody notices the leak and the roof stays unrepaired.
Damp wood and paper facing in a warm, still attic are ideal for mold. Growth can begin on the sheathing and on the back of the ceiling drywall.
Once storm after storm has saturated the insulation, the ceiling starts getting wet. The drywall may sag, and rings of brown staining appear on the ceiling of the room below.
The sheathing comes apart in layers and no longer grips the roofing nails. Rafters stay damp enough to decay, and mold covers large areas of the roof deck.
Every day, a fan duct that stops short of the roof releases humid bathroom air into the attic. That moisture condenses on the cold sheathing and looks just like a roof leak.
Poorly ventilated attics often grow mold across the underside of the sheathing. Before anyone looks, it may already have spread over a large section.
Saturated insulation is heavy. Drywall that has been wet from above weakens at the fasteners and can drop suddenly, bringing wet insulation down with it.
In a lot of homes the attic houses an air handler along with its condensate line and pan. When the pan overflows or the drain clogs, insulation gets wet for weeks without any rain as a warning.
Have a different question? Call us and we will answer it over the phone.
Call (510) 447-5586Take action now and prevent costly damage. Miami Restoration Co is ready to help.
Call (510) 447-5586 Now